Operation and Maintenance Manual

MultiHaul™ Installation, Operation and Maintenance Manual
Page 30
3 Setup and Monitoring Using the Web-based
Management
In order to carry configuration, monitoring or maintenance tasks, connect your PC to
any one of the system’s Ethernet ports and launch the chosen management option.
There are 2 options to connect and manage the MultiHaul™:
1) HTML Web-Based Management with Graphical User Interface (GUI)
2) Command Line Interface
It is recommended to use the web-based management option that is described in
detail in this document as it provides self-explanatory graphical user interface for
managing both ends of the link and the PTMP cluster.
This chapter includes the following topics:
• Connecting to system using the Web-Based Management
• Connecting to system using the Command Line Interface
• Web-Based Management Main Page
• Quick Configuration Wizard
• General Configuration Commands
3.1 Connecting to System Using the Web-Based Management
1. Launch an Internet Browser and enter https:// followed by the system’s IP
address. The system’s default IP address is 192.168.0.1.
Figure 3-1 Launching the Web-Based Management