Operation and Maintenance Manual

MultiHaul™ Installation, Operation and Maintenance Manual
Page 3
About this Document
This document is the Installation, Operation and Maintenance manual for the
MultiHaul™, Siklu’s point-to-multipoint wireless radios.
It provides product overview and details the installation, setup and monitoring of the
Base Unit (BU) and the different Terminal Units (TU).
Note:
Features and functionality described in this document may be available for specific
product models or starting from specific SW version.
Please review the individual product’s release notes to verify if a specific feature is
supported in the product you use.
Applicable Products and Releases
• V-Band Point to multipoint – MultiHaul™ B100, T200, T201
o MultiHaul™, minimum SW release MH-2.3.0
Audience
This document assumes a working knowledge of wireless connectivity platforms and
their operating environments.
This document is intended for use by all persons who are involved in planning, installing,
configuring, and using the MultiHaul™ system.
Conventions
The following conventions are used in this document in order to make locating, reading,
and using information easier.
Special Attention
Hint:
Informs you of a helpful optional activity that may be performed at the current
operating stage.
Note:
Provides important and useful information or describes an activity or situation that
may or will interrupt normal operation of the MultiHaul™ system, one of its
components, or the network.