Datasheet

ManualsBrandsMulticore ManualsSoldering Iron AccessoriesSoldering Tip Cleaner 15 g Tip Tinner

Safety Data Sheet according to (EC) No 1907/2006 - ISO 11014-1

Page 1 of 5

sds no. : 181481

V004.0

Revision: 20.05.2010

printing date: 25.11.2011

TTC-LF 15G RS

1. Identification of the substance/preparation and of the company/undertaking

Trade name:

TTC-LF 15G RS

Intended use:

Tip Tinner/Cleaner

Company name:

Henkel Limited

2 Bishop Square Business Park

AL109EY Herfordshire Hatfield

Great Britain

Phone: +44 1606 593933

Fax-no.: +44 1606 863762

E-mail address of person responsible for Safety Data Sheet:

ua-productsafety.uk@uk.henkel.com

Emergency information:

24 Hours Emergency Tel: +44 (0)1442 278497

2. Hazards identification

Fumes evolved at soldering temperatures will irritate the nose, throat and lungs.

3. Composition / information on ingredients

Declaration of ingredients according to (EC) No 1907/2006:

Hazardous components

CAS-No.

EINECS

ELINCS

content Classification

Tin

7440-31-5

231-141-8 40 - 50 %

Citric acid

77-92-9

201-069-1 5 - 10 % Xi - Irritant; R36

Silver

7440-22-4

231-131-3 0,1 - 1 % No classification required.

Copper

7440-50-8

231-159-6 0,1 - 1 % R52/53

Xn - Harmful; R22

Xi - Irritant; R36/37/38

For full text of the R-Phrases indicated by codes see section 16 'Other Information'.

Substances without classification may have community workplace exposure limits available.

4. First aid measures

Summary of content (5 pages)

PAGE 1
Safety Data Sheet according to (EC) No 1907/2006 - ISO 11014-1 Page 1 of 5 sds no. : 181481 V004.0 TTC-LF 15G RS Revision: 20.05.2010 printing date: 25.11.2011 1. Identification of the substance/preparation and of the company/undertaking Trade name: TTC-LF 15G RS Intended use: Tip Tinner/Cleaner Company name: Henkel Limited 2 Bishop Square Business Park AL109EY Herfordshire Hatfield Great Britain Phone: Fax-no.
PAGE 2
MSDS-No.: 181481 V004.0 TTC-LF 15G RS Page 2 of 5 Inhalation: Move to fresh air. If symptoms persist, seek medical advice. Skin contact: Rinse with running water and soap. Obtain medical attention if irritation persists. Eye contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical advice. Ingestion: Do not induce vomiting. Seek medical advice. 5. Fire fighting measures Combustion behaviour: The product itself does not burn.
PAGE 3
MSDS-No.: 181481 V004.0 TTC-LF 15G RS Page 3 of 5 8. Exposure controls / personal protection Components with specific control parameters for workplace: Valid for Great Britain Basis UK EH40 WELs Ingredient ppm TIN (INORGANIC COMPOUNDS AS SN) 7440-31-5 SILVER (METALLIC) 7440-22-4 SILVER, METALLIC 7440-22-4 COPPER, INHALABLE DUSTS AND MISTS (AS CU) 7440-50-8 COPPER, FUME 7440-50-8 COPPER, INHALABLE DUSTS AND MISTS (AS CU) 7440-50-8 mg/m3 2 Type Time Weighted Average (TWA). Time Weighted Average (TWA).
PAGE 4
MSDS-No.: 181481 V004.0 TTC-LF 15G RS Page 4 of 5 Materials to avoid: Solder alloy will react with concentrated nitric acid to produce toxic fumes of nitrogen oxides. Hazardous decomposition products: Thermal decomposition can lead to release of irritating gases and vapors. 11. Toxicological information Oral toxicity: May cause irritation to the digestive tract. Inhalative toxicity: Fumes evolved at soldering temperatures will irritate the nose, throat and lungs.
PAGE 5
MSDS-No.: 181481 V004.0 TTC-LF 15G RS Page 5 of 5 15. Regulations - classification and identification Indication of danger: none Risk phrases: Not classified as hazardous. Safety phrases: not applicable Additional information: Avoid breathing fumes given out during soldering. Flux fumes may irritate the nose, throat and lungs and may after prolonged/repeated exposure give an allergic reaction (asthma). After handling solder wash hands with soap and water before eating, drinking or smoking.