User Guide

A Super-Bonding, Flexible Cementitious
Coating for Concrete Restoration.
DESCRIPTION AND USE
T
he MULTICOAT KRETE KOTE 2000 System
is a super bonding, flexible Synthetic Resin
modified cementitious coating which forms a
cost-effective, durable, anti-skid, weather and
chemical resistant surface over properly pre-
p
ared substrates. It can be applied to drive-
ways, walkways, steps, decks, building,
bridges, etc.
ADVANTAGES
●
Bonds Securely to Structurally Sound
Concrete
●
Easy to Apply and Cost Effective
●
Fast Curing Time - Short Down Time
●
Resistant to Moisture
Penetration, Salt Spray and Most
Chemicals
●
High Flexural Strength - Will Withstand
Moderate Flexing, Unlike Most Concrete
Repair Coatings
●
High Impact Resistance
●
Resistant to Freeze-Thaw Conditions
●
Multiple Decorative Anti-Skid Finishes and
Designs
●
Mulitple Color Selections
●
Water Base - Environmentally Safe to Use
and Apply
SEE TEST DATA
SURFACE PREPARATION
Substrate must be structurally sound, free
from grease, oil, paint, dirt, dust, sealers,
laitence, curing compounds and other foreign
materials which may prevent proper bonding.
Cracks and imperfections must be r
epair
ed
and proper expansion joints installed;
cleaned and caulked if alr
eady existing.
APPLICATION
MULTICOAT KRETE KOTE and TOP COAT 2000
are furnished in 65 lb. bags and field mixed with
potable (clean) water in the approximate amount
of 1
3
⁄4-2 gallons per bag, preferably with a
special MULTICOAT Mixing Paddle. Mix
vigor
ously to disperse all lumps and to
thoroughly wet all particles,. Suggest 1-1
1
⁄2 min-
utes after all dry material added. Use mar
gin
tr
owel to clear vessel sides. Adjust to desired
consistency by addition of dry material or
small
amount of water
. For best r
esults let Kr
ete Kote or
Top Coat stand in bucket for 3-5 minutes, then
add a small amount of water and rebreak materi-
al. This will give additional pot life.
Mixed KRETE KOTE and TOP COA
T 2000 are
applied by roller, trowel, or squeegie in one coat
plus texture coat, or two or more coats plus tex-
ture coat, depending on sur
face condition.
KRETE KOTE SYSTEM
SURFACE PREPARATION
CRACK REPAIR WITH SPEED BOND (SEE CRACK
REPAIR SYSTEM).
BASE COAT APPLICATION – TROWELED
FINISH COA
T – TEXTURED IF DESIRED
HOPPER GUN – KNOCK DOWN
ACRATHANE COLORSEAL