User Guide

LIMITATIONS
Do not apply when substrate temperature is below 50°F or
above 100°F; if ambient temperature is below 50°F and
f
alling; or over 100°F and expected to rise; or if precipitation
is expected within a 24-hour period.
PACKAGING AND STORAGE
B
ASE COAT – SCRATCH KOTE/
K
RETE KOTE
o
r MULTI-BASE is
f
urnished in 65 lb bags.
STUCCO FINISH – MULTI-TEX STUCCO furnished in 65 lb - 5
gallon pails, Ready-to-Use.
FIBERGLASS MESH – (20 x 10 Leno weave, 4.5 oz per sq. yard,
t
hickness .0135".) 475 sq. ft. rolls 38" wide.
Store in dry area at 40-90°F.
Shelf life is approximately 24 months in unopened bags and
approximately 18 months in unopened pails.
WARRANTY
Materials are guaranteed with respect to uniformity and quality
w
ithin manufacturers’ specifications. Seller makes no other
w
arranty, expressed or implied, regarding the use of its products.
S
ince use of the product is beyond Seller’s control, the Buyer
assumes all risks of use. Seller’s sole obligation shall be to
replace material if found to be defective. Seller shall not be
liable for any damage, injury, loss, direct or consequential,
resulting from use of its products.
STUCCO MIX
TEST METHOD RESULTS
1. Weatherometer. . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM G-23 . . . . . . . . . . . . . . . . . . . . . . . . . 2000 hours – Passed
2. Moisture Resistance. . . . . . . . . . . . . . . . . . . . . . . ASTM D2247 . . . . . . . . . . . . . . . . . . . . . No blistering or cracking
3. Freeze-Thaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section vi d EIFS criteria . . . . . . . . . . . . . . . No change – Passed
4. Abrasion Test (Falling Sand) . . . . . . . . . . . . . . . . ASTM DE-968-A . . . . . . . . . . . . Initial wear started at 3200 liters
5. Fungus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mil-Std 810-B (method 508) . . . . . . . . . . . . . . . . . . . . . . . Passed
6. Moisture Vapor Transmission . . . . . . . . . . . . . . . . ASTM E-96 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.56 Perms
BASE COAT
1. Weatherometer. . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM G23 . . . . . . . . . . . . . . . . . . . . . . . . . 2000 hours – Passed
2. Compressive Strength . . . . . . . . . . . . . . . . . . . . ASTM C109 . . . . . . . . . . . . . 45 Days air cured. . . . . . . 2595 psi
3. Tensile Strength . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM C190 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 457 psi
4. Bond Strength (Flatwise Tension) . . . . . . . . . . . . ASTM C297 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 psi
5. Abrasion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM 1242A. . . . . . . . . . . . . 1000cyc-1000gms . . . . 39 mil loss
6. Salt Spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM B117 . . . . . . . . . . . . . . . . . . . . . . . . . . 300 hours – Passed
7.
W
ater Vapor Transmission . . . . . . . . . . . . . . . . . . ASTM E96A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.26 Perms
8. 50-Cycle Freeze Thaw . . . . . . . . . . . . . . . . . . . . ASTM C67 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Passed
9. Flexural Strength . . . . . . . . . . . . . . . . . . . . . . . . . ASTM D790 . . . . . . . . . . . . . . . . . . Modulus of Rupture – 770psi
10.
Impact Resistance . . . . . . . . . . . . . . . . . . . . . . . MIL-D-3134F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Passed
11. Flame Spread . . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM E84 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class A
TEST DATA: ICF STUCCO SYSTEM
The ICF STUCCO SYSTEM complies with Federal Specification TT.C-55b for “Coating, Textured for Interior and Exterior Masonry
Surfaces.”
The Coating of the Future…Today
MC0406
MULTICOAT
®
CORPORATION
West Coast
Toll Free: (877) 685-8426
(949) 888-7100 F
ax (949) 888-2555
Website: www.multicoat.com
E-mail: info@m
ulticoat.com
MULTICOAT
®
PRODUCTS, INC.
East Coast
Toll Free: (800) 660-6729
(304) 586-0616 F
ax (304) 586-0620
Website: www.multicoat.com
E-mail:
inf
o@m
ulticoat.com
Available Through: