Specifications

Appendix
27
5.2.2 MEA Amplifiers
Product Product
Number
Description
MEA amplifier for inverted
microscopes
MEA1060-Inv
MEA amplifier for upright
microscopes
MEA1060-Up
Probe interface and 60 channel pre- and filter
amplifier with custom gain and bandwidth
MEA amplifier with
blanking circuit for
inverted microscopes
MEA1060-Inv-BC
MEA amplifier with
blanking circuit for upright
microscopes
MEA1060-Up-BC
Probe interface and 60 channel pre- and filter
amplifier with custom gain and bandwidth. The
blanking circuit prevents the amplifier from
getting saturated and thus prevents stimulus
artifacts.
5.2.3 Accessories
Product Product
Number
Description
Holder with M3 threads MPM3 For fixing tools with M3 threads next to the
MEA
1-Channel temperature
controller
TC01
2-Channel temperature
controller
TC02
PID based technology, set-point temperature
reached fast within 30 s to 5 minutes, control
temperature range from ambient temperature
to +50 °C
Perfusion cannula with
programmable fluid
temperature
PH01 Temperature can be programmed with the
temperature controller TC01 or TC02
Signal divider for
MEA-Systems
SD-MEA Placed between a MEA1060 amplifier and
MC_Card, permits to select any channel, does
not interfere with the data acquisition, for
example for connecting an oscilloscope or other
devices to single channels
MEA Switch for 4
amplifiers
MEAS4/2
MEA Switch for 2
amplifiers
MEAS2/1
The MEA Switch allows you to acquire data
from 60 single channels from two MEA1060
amplifiers. If you have a 128-channel MC_Card
(MEA 120-System), you can even pick 128
channels in total from two MEA pairs with the
MEA Switch for four amplifiers MEAS4/2. The
selected channels are combined to one
Electrode Raw Data stream that is delivered to
MC_Card by a 68 pin MCS High Grade Cable.
Digital in/out extension Di/o For connecting other devices to single digital
input and output channels of the MC_Card via
BNC connectors (up to 16 inputs and 16 outputs),
for example for synchronizing stimulation and
recording, or for applying feedback.
Isolated power supply with
10 W power and ± 6.3 V
output voltage
IPS10W Isolated power supply for integration into the
data acquisition computer. For supplying power
to MEA1060 amplifiers.