User guide

Appendix
37
Power supply unit (MPU30)
Input voltage 90 to 264 VAC @ 47 to 63 Hz
Output voltage 11 - 13 V
Max. Power 30 W
Rear Panel interface and connectors
USB USB 2.0 High Speed cable (type A - mini B)
Ground Common jack 4 mm, banana plug
Power supply Barrel connector 0.7 x 2.35 mm
Software
Microsoft Windows ® operating system Windows 7, Vista or XP with NTFS
English and German versions are supported
MC_Rack program Version 3.7.0 and higher
Data acquisition and analysis software
MC_DataTool program Version 2.4.5 and higher
Data export ASCII (*.txt), binary file (*.raw) format
MC_Stimulus II Version 3.0.0 and higher
Stimulation software
LTP-Director Version 1.0.0 and higher
Data acquisition, analysis and stimulation
software
Warning: The USB-MEA32STIM4 device may only be used together with microelectrode array
(pMEA32S12-Lx) from Multi Channel Systems MCS GmbH, and only for the specified purpose.
Damage of the device and even fatal injuries can result from improper use. Do not open the
data acquisition box and do not change hardware configuration as it could lead to improper
behavior of the system.