User guide

USB-MEA32-STIM4 Manual
16
4.3.2 Rear Panel
USB
The USB connector is used to transfer the amplified and digitized data from all data channels
and the additional digital channel to any connected data acquisition computer via High Speed
USB 2.0 (type A - mini B) cable.
Power In
Connect the power supply unit. This power supply powers the USB-MEA32-STIM4 main unit
only. The device needs 9 V and 1.3 A / 11.7 W.
Ground
If an additional ground connection is needed, you can connect this plug with an external
ground using a standard common jack (4 mm) for the plug and a crocodile clip.
CONNECTING THE USB-MEA32-STIM4