System Manual Instruction Manual

Appendix

Data converter and USB interface:

Sampling frequency up to 40 kHz

Maximal data rate 20.5 MB/s

Data resolution 16 Bit

USB Version USB 2.0 High Speed

Heating element and temperature

sensor:

Heating element impedance

20 

Temperature sensor type PT 100 with 4 wire connection

Rear Panel interface and connectors:

1 16 bit digital in / out 68-pin MCS standard connectors,

MCS high grade cable

1 Digital out D0 OUT Lemo connector (EPL.00.250 NTN)

1 Digital in D0 IN Lemo connector (EPL.00.250 NTN)

1 Audio output Stereo jack 3.5 mm

4 Additional analog inputs Lemo connector (EPL.00.250 NTN)

USB USB 2.0 High Speed cable (type A – Mini B)

Ground Common jack 4 mm, banana plug

Power supply Barrel connector 0.7 x 2.35 mm

Power supply unit (MPU 30):

Input voltage 90 – 264 VAC @ 47 - 63 Hz

Output voltage 11 – 13 V

Max. Power 30 W

Software:

MC_Rack program Version 3.7.0 and higher

Operating system Windows 7, XP or Vista with NTFS

English and German versions are supported

MC_DataTool program Version 2.4.5 and higher

Data export ASCII (*.txt), binary file (*.raw) format

Warning: The device may only be used together with Microelectrode Arrays from Multi

Channel Systems MCS GmbH, and only for the specified purpose. Damage of the device and

even fatal injuries can result from improper use. Do not open the data acquisition box and

do not change hardware configuration as it could lead to improper behavior of the system.