Manual

99
13 Appendix
13.1 Technical Specifications STG4004 and STG4008
Operating temperature 10 °C to 50 °C
Storage temperature 0 °C to 70 °C
Dimensions (W x D x H) 325 x 310 x 85 mm
Weight 2.8 kg
Fuse internal, 3.15 A slow
Supply voltage (external power
supply)
100 - 240 VAC @ 47 to 63 Hz
Number of analog output channels 4 (STG4004) or 8 (STG4008)
Output voltage -8 V to +8 V @ max. ± 20 mA
Output voltage resolution 1 mV
Rise time (10-90 %) voltage 1.7 μs @ delta U = 8 V
Time lag between Sync Out and
voltage output
15 (± 2) μs @ amplitude > 200 mV
Output current Standard: -1.6 mA to +1.6 mA @ max.120 V compliance
voltage (between +I and -I)
Or: -16 mA to +16 mA @ max.120 V compliance voltage
(between +I and -I)
Or: -160 μA to +160 μA @ max.120 V compliance voltage
(between +I and -I)
Output current resolution Standard: 200 nA (with ± 1.6 mA)
Or: 2000 nA (with ± 16 mA)
Or: 20 nA (with ± 160 μA)
Output current slope
600 μA/μs @ R
L
= 10 k
Rise time (10-90 %) current,
0 - 100 μA
1.4 μs @ R
L
= 10 k
Time lag between Sync Out and
current output, 0 - 100 μA
15 ( ± 2) μs @ R
L
= 10 k if continuous mode is enabled
50 ( ± 2) μs @ R
L
= 10 k if continuous mode is disabled
Resolution 14 bit
Time resolution 20 μs
Output signals Freely programmable (rectangular, ramp, sinusoidal)
Maximum frequency (rectangular
waveform)
25 kHz
Memory capacity for stored
waveforms
64 MB
Timing on external trigger
Minimum time length of trigger input (TTL) 40 (± 10) μs
Time lag between trigger input and Sync Out 30 (± 10) μs
Maximum trigger input frequency 10 kHz