User guide

Stimulus Generator 4002 Manual
52
9.3 Toolbar
For your convenience, you will find some of the more commonly used commands as a button
on the toolbar.
New File
Creates a new MC_Stimulus II file (*.stm) file.
Open File
Opens a previously saved MC_Stimulus II file (*.stm) file.
Save File
Saves a MC_Stimulus II *.stm file to the chosen destination.
Cut Row
Deletes selected row(s) and sends deleted row(s) to clipboard.
Copy Row
Sends selected row(s) to clipboard.
Paste Row
Pastes row(s) from clipboard and overwrites row(s) starting
at the selected row.
Print
Prints active channel of active worksheet.
Information Opens the About dialog, where you can find information about
the hardware, software, and firmware versions.
Download Downloads stimulation file to the connected STG (only available
if the STG has active computer connection).
Download and
Start
Downloads and starts stimulation file to the connected STG
(only available if the STG has active computer connection).
Start
Starts downloaded stimulation file (only available if the STG
has active computer connection).
Stop
Stops downloaded stimulation file (only available if the STG
has active computer connection).