Owner manual

Roboinject Manual
74
6.4 Ordering Information
Sources of Supply
Multi Channel Systems MCS GmbH recommends the use of the products tested
with the Roboinject system.
Well Plates
Product Product
Number
Description Supplier
V96 MicroWell
TM
Plates
249570 Clear polystyrene, conical,
non-treated, non-sterile
Well plate Nunc
with cut open well
WPN V96 MicroWell® Plate
from Nunc, well H12 is
cut open
Nunc
www.nuncbrand.com
Adjustment Tool
for Nunc plates
ADN For adjusting the
Roboinject, for 96
MicroWell
TM
Plate from
Nunc
Multi Channel Systems MCS
GmbH
www.multichannelsystems.
com
Injection
Product Product
Number
Description Supplier
Injection pipettes IN-25 10 injection pipettes,
ID 0.49 mm,
tip opening approx.
25 μm
Plunger PL Plunger for injection
mount
Reaction tubes RT
41
H05NGS
Reaction tubes, 0.5 ml,
ultra low retention,
unit of 500
Multi Channel Systems
MCS GmbH
www.multichannelsystems.
com
Please contact your local
retailer.
Microloader tips 5242
956.003
Pipette tip for filling
microinjection capillaries
Eppendorf
www.eppendorf.com
Glass capillaries 08 3105G Glass capillaries 1-5 μl
for Model 105
Süd-Laborbedarf GmbH
Starnberger Straße 22
82131 Gauting
www.suedlabor.de
Luer connector FTLL410-
9
Luer connectors for
fitting of the injection
pipettes
MEDNET GmbH
Borkstrasse 10
48163 Münster
www.medneteurope.com
Mineral oil M5904 Oil for filling the injection
needle before first use
Sigma-Aldrich
www.sigmaaldrich.com