Power Supply PS40W Manual
Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted without the express written permission of Multi Channel Systems MCS GmbH. and the author assume no responsibility for errors or omissions, or for damages resulting from the use of information contained in this document or from the use of programs and source code that may accompany it.
Table of Contents 1 Important Information and Instructions 1 1.1 Operator's Obligations 1 1.2 Guarantee and Liability 2 1.3 Important Safety Advice 2 2 Welcome to the Power Supply PS40W 3 3 Setting Up and Connecting the PS40W 4 3.1 Front Panel 4 3.
1 Important Information and Instructions 1.
1.3 Important Safety Advice Warning: Obey always the rules of local regulations and laws. Only qualified personnel should be allowed to perform laboratory work. Work according to good laboratory practice to obtain best results and to minimize risks. The product has been built to the state of the art and in accordance with recognized safety engineering rules. The device may only be used for its intended purpose; be used when in a perfect condition.
2 Welcome to the Power Supply PS40W The PS40W is a standard power supply delivering supply voltages to connected devices. It supplies power with 42 W output power and +/– 7 V output voltage. The PS40W is especially recommended for use with Multi Channel Systems products, for example, it is perfect for supplying power to programmable gain amplifiers PGA and for custom setups that lack an internal power supply IPS10W. But the PS40W is also perfect for custom applications.
3 Setting Up and Connecting the PS40W 3.1 Front Panel The front panel of the PS40W holds the connectors for delivering the supply voltage to the following devices as well as two green LED lights indicating the negative and the positive output voltage of 7 volts, respectively. The color of the plugs indicates the polarity.
4 PS40W Power Supply Technical Specifications PS40W Operating temperature 10 °C to 40 °C Storage temperature 0 °C to 50 °C Dimensions (W x D x H) 172 mm x 220 mm x 52 mm Weight 1750 g Main fuse 2A Supply voltage 90 - 264 VAC @ 50 - 60 Hz Output voltage ± 7.0 V ± 10 % Output current max. 2.
6
