Owner manual

6
1. ConnectthePPS2withthepowersupplyunittothepoweroutlet.
2. ConnectthePPS2withtheUSBcableA-BtothecomputerforPPS2softwarecontrol(possible
viaanUSBhub).
3. ConnectthetubesofthePPS2totheperfusionsolution,thePH01,theperfusionoutandthewaste
bottle.Pleasefollowtheinstructionsontheleaetinthetubebag.Adjusttheowrate.
Power Supply
Unit
USB Cable A-B
PPS2 Rear Panel
Perfusion In
(via PH01)
Perfusion Out (from MEA)
Waste Bottle
Perfusion Solution
Connection of the Peristaltic Perfusion System PPS2
Power Outlet
5
TC02 Rear Panel
Connection of the Perfusion Cannula PH01
Perfusion Cannula PH01
CA Cable: D-Sub9 to Pt100
1. ConnecttheperfusioncannulaPH01withtheCAcable(D-Sub9toPt100)tothetemperature
controllerTC02.Theconnectorissymetrical,sotheorientationoftheconnectorisirrevlevant.
2. Settherespecitvechannelofthetemperaturecontrollerviacontrolsoftwareorviatouchscreentothe
devicePH01.PleaseseetheTCXmanual(CD:Manuals/MEA-System/TC01-02_Manual_RevG.pdf)for
detailedinformation.