Microelectrode Array (MEA) Cleaning Quick Guide
MEA Cleaning and Storage Cleaning the MEAs Prepare a 1% solution of Terg-A-Zyme (Sigma, order number Z273287), diluted in distilled water. Place MEAs in this solution overnight at room temperature. Apply gentle shaking or rocking, if possible. After Terg-A-Zyme treatment, rinse thoroughly with distilled water. Terg-A-Zyme solution can be stored at 4 °C and reused for about a week. Dry the MEAs and apply hydrophilic surface treatment (see below), if necessary.
