Specifications

+
PROPAC
CHARGING THE PROPAC
1) LOW BATTERY:
Switch off and disconnect your Profilux Plus unit(s) in order to charge the battery pack.*
* A soon as the red LED of the battery level indicator starts
blinking, the Propac should be turned off and recharged
promptly. Otherwise, the Profilux Plus unit(s) will cut-out
automatically (deep discharge protection).
2) RE-CHARGING THE BATTERY PACK:
Switch off your Propac and connect the multi-voltage charger. Ccharging time: Propac 1 = 4 hrs, Propac 2 = 4,5 hrs**
3) BATTERY CHARGED
4) BATTERY CHARGED:
Disconnect the multi-voltage charger. The Propac indicates
a full battery after it is being switched on.
** Re-charging the Propacs for ten hrs will result in
a 25% gain of flash capacity.
7