Specifications

QUICK START GUIDE
FOR PROFILUX plus
1) Align plug and socket, see arrows.
2) Connect plug to socket.
3) Turn plug right until it snaps in.
Additional visual indications
on a Profilux Plus unit when
operated with a Propac.
CONNECTION OF LAMP CABLE
AND MULTI-VOLTAGE CHARGER.
15 SEC AUTO-OFF” MODE
The modeling-Llght on-off button/100% on-off button will blink
when the unit switches to “auto-off” mode after not being fired for
15 sec. Also refer to the „Profilux Plus Quicks Start Guide“, page 2,
„Important Information“ under point 4.
LOW BATTERY
The display will indicate “LO” as soon as a
the Propac reaches a critical state of charge.
See „1) Low Battery“ on the following page.
1 1
2
3
6
EN