User guide

Software/Driver Installation (SCO Open Server)
56 MultiModemISI Hybrid Server Cards, ISIHP & ISIHI Series
SCO Open Server 5 Driver Installation
The ISI driver for SCO Open Server 5 is shipped on CD-ROM (FAT
file system) and can also be downloaded from the Multi-Tech web
site. In both cases, the driver files are compressed (tarred). Users
installing from the CD-ROM should begin at To install from CD-
ROM directly below. Users installing from a floppy disk should skip
down to To install driver from floppy disk later in this section. The
filename of the SCO5 driver in its tarred form is sco50x.tar.
This present installation section is task-oriented with minimal
explanation of procedural steps. The section Multi-Tech Installation
Script, which immediately follows this section, presents additional
details to aid in installation.
To install from CD-ROM:
# mount -r /dev/cd0 /mnt
# cd /mnt
# cd servcard/drivers/sco50x
#cp sco50x.tar /
# cd <ENTER>
To format a floppy disk for SCO5:
1. At the Unix prompt, run the scosh program.
2. Select Manager.
3. Select Archive.
4. Select Format.
5. Make sure that Device is pointed to the floppy drive.
6. Select Continue.
To untar the driver file and copy files onto floppy
disk:
1. Make a temporary directory for the ISI driver files.
# mkdir /isi