User guide

Software/Driver Installation (Windows NT)
46 MultiModemISI Hybrid Server Cards, ISIHP & ISIHI Series
Removing ISIHx Card and Driver in Windows
NT 3.51/4.0
1. Go to Start | Settings | Control Panel | Network. Click on the
Adapters tab.
2. Select "MultiTech 4, 8, 16-port ISI card," and then click
Remove.
To complete the un-install procedure, restart your computer.
I/O Addresses and IRQ Codes
Unlike the ISIHI, the ISIHP has no DIP switch for I/O addresses and
no jumper to determine the IRQ code. The input/output address and
the interrupt request code (IRQ) for the ISIHP are assigned
automatically during driver installation. During any subsequent re-
configuring of your PC, you may need to know the assigned I/O
address and IRQ code. To determine the I/O address and IRQ
assigned to the ISIHP:
(for Windows NT) click on Start, Settings, Control Panel and select
the ISI Cards icon; or click on Start, Programs, Administrative
Tools (Common), Windows NT Diagnostics, Resources;