User guide

Software/Driver Installation (Windows NT)
MultiModemISI Hybrid Server Cards, ISIHP & ISIHI Series 43
4. Select ports for modem use.
 For the ISIHP-2S/2U, you should have reserved 8 ports during
driver installation. The first four of these ports should have been
assigned as terminal adapters (in the previous procedure). Now
select the last four ports, which will be used as modems.
 For the ISIHP-4S/4U, you should have reserved 16 ports during
driver installation. The first eight of these ports should have
been assigned as terminal adapters (in the previous procedure).
Now select the last eight ports, which will be used as modems.
 For the ISIHP-1S, you should have reserved 8 ports during
driver installation. Recall the port numbers assigned as terminal
adapters (for example, COM3 and COM4); skip two port
numbers; then assign the next two ports as modems (for example
COM7 and COM8).
Click Next. The modems will be installed to the selected COM
ports.