User guide

Software/Driver Installation (Windows 2000)
MultiModemISI Hybrid Server Cards, ISIHP & ISIHI Series
31
ISIHx for Windows 2000: Installing TAs and
Modems to COM Ports
Pre-Requisite: Installation of Windows 2000 driver software must be
completed before you can install the terminal adapters and
modems of the ISIHx card.
1. Go to Start | Settings | Control Panel | Phone and Modem
Options.
2. The Location Information screen appears.
Enter the appropriate area code and access number. Click OK.
3. At the Phone and Modem Options screen, click on the Modems
tab and click Add.
4. At the Install New Modem screen, click on "Don't detect my
modem ... " and click Next.
5. If the software driver CD-ROM (or other media, in cases of using
drivers downloaded from the MultiTech web site) is not already in
the appropriate disk drive in the PC, insert it now.
6. If you are installing an ISIHP-1S card, go to step 25 for special
instructions and then return to step 7. Otherwise go directly to step
7.
Installing Terminal Adapters to COM Ports.
7. The Add/Remove Hardware Wizard screen will appear.
Click Have Disk ... .
8. The Install from Disk screen will appear.
Type or browse for the file path of the terminal adapter software
(for example, E:\servcard\drivers\win2000). Click OK.
9. The Install New Modem screen will appear.
Highlight the terminal adapter protocol to be used. Click Next.
10. The Install New Modem - port list screen will appear.