User guide

Software/Driver Installation (Windows 2000)
MultiModemISI Hybrid Server Cards, ISIHP & ISIHI Series
29
sequence of screens deals with the setting up of ISI ports. The first
screen in this sequence is the Found New Hardware Wizard --
Welcome screen.
The Found New Hardware -- MultiTech ISI Port screen will
appear once for each modem and terminal adapter on the ISIHP
card:
 16 times for the ISIHP-4S/4U/4SD (although only 8 devices can
be installed on the 4SD); or,
 8 times for the ISIHP-2S/2U/1S (although only 4 devices can be
installed for the ISIHP-1S).
12.The Install Hardware Device Drivers screen appears.
Select Search for a suitable driver ...  and click Next.
13. The Locate Driver Files screen appears (Windows 2000 is
seeking the ISI Port device driver). Select CD-ROM drives and
click Next.
14. The Driver Files Search Results screen will indicate that the
isiport.inf file has been found on the CD-ROM. Click Next.
15. A completion screen will appear. It will indicate that the first
MultiTech ISI Port has been set up successfully. Click Finish.
Notice that the auto-detection facility of Windows 2000 will repeat
the ISI Port installation sequence 7 more times for ISIHP-1S/2S/
2U, or 15 more times for ISIHP-4S/4U/4SD. That is, the Found
New Hardware -- MultiTech ISI Port screen will appear many
times after the ISI driver has been located. On this screen, the
messages Found New Hardware and Installing ... will appear
alternately.
Please understand that the repetition of these screen sequences is
normal and is not an error. It does not indicate any problem with
your PC, or with the MultiTech ISI card, or its driver software.
16. Driver installation for the ISIHP card is complete.