User guide

Software/Driver Installation (Windows 2000)
28 MultiModemISI Hybrid Server Cards, ISIHP & ISIHI Series
Installing ISIHP Software for Win 2000
NOTE: A series of installation wizard screens will appear
repeatedly during this procedure (step 12). This is not an error.
Do not discontinue the procedure when the installation wizard
screens repeatedly appear.
1. Shut down Windows 2000 and turn off the PC.
2. Install the ISIHP card in an available PCI expansion slot in the
computer. Follow the computer manufacturer's instructions
concerning installation of expansion cards. Observe standard
precautions regarding electro-static discharge (ESD) when handling
the ISIHP board (the board should be kept in its shipping bag until
used). During installation, handle the ISIHP circuit card by its
edges and keep one hand in contact with the PC chassis.
3. Turn on the PC and start Windows 2000.
4. Insert the ISI driver CD-ROM into the CD-ROM drive (if drivers
have been downloaded from the MultiTech web site, they will
typically be on diskette; in that case, insert diskette into floppy
drive).
5. Windows 2000 will detect the ISIHP card. The Found New
Hardware Wizard- Welcome screen will appear. Click Next.
6. The Install Hardware Device Drivers screen appears. Select
"Search for a suitable driver ..." and click Next.
7. The Locate Driver Files screen appears (Windows 2000 is seeking
the driver for the ISIHP card). Select CD-ROM drives and click
Next.
8. The Driver File Search Results screen appears. Click Next.
9. A progress screen will appear briefly while files are being copied.
10.A completion screen will appear. Click Finish.
11. Immediately after the ISI driver installation has been completed,
another Found New Hardware screen will appear briefly
indicating that the MultiTech ISI Port has been detected.
A second sequence of installation wizard screens appears. This