User guide

16 MultiModemISI Hybrid Server Cards, ISIHP & ISIHI Series
Hardware Installation
Introduction
This section describes how to install the ISIHx server card into the
expansion slot in your personal computer, which involves
 Opening your PC
 Installing the card into the PC (ISIHP uses PCI-bus expansion slots;
ISIHI uses ISA slots)
 Set I/O address DIP switch and IRQ jumper (ISIHI only)
Computer Requirements
 Pentium-based PC or compatible (PCI bus required for ISIHP; ISA
required for ISIHI)
 Microsoft Windows 2000, Windows 95, Windows 98, Windows Me,
Windows NT versions 3.51 and 4.0, SCO Open Server version 5.0,
Novell NetWare, or Linux
 CD-ROM drive, floppy disk drive (for use in cases where drivers are
downloaded from web site)
 800 blocks of hard disk space for UNIX, 100K bytes for Windows
NT, 34K bytes for Windows 95, 50K bytes for Novell
Shipping Contents
 ISIHx card
 RJ-45 ISDN cords (1 for ISIHP-1S; 2 for ISIHx-2S/2U; 4 for ISIHP-
4S/4U/4SD)
 ISI Product Family CD-ROM (containing drivers, utilities, &
documentation)
 Quick Start Guide