Specifications

52 MultiModemISI Hybrid Series, ISIHI-2S/2U
Chapter 3—Software/Driver Installation
10. To load the configuration, click Next in the Load Configuration dialog box.
11. Then click Finish in the Configured dialog box.
The first TA now is configured.
12. Click Back to return to the Configuration dialog box and repeat steps 5 through 10
to configure the remaining TA(s). If you install multiple ISIHI-2S/2U cards in the
same PC, you must configure two TAs per card installed. For example, if you install
four ISIHI-2S/2U cards in one PC, you have to configure eight TAs (two per card).
13. After all TAs are configured, close the ISDN TA Configuration utility and connect to
the network again.