Specifications

MultiModem ISI Hybrid Series, ISIHI-2S/2U 49
Chapter 3—Software/Driver Installation
ISDN TA Configuration Utility
1. Before you start, disconnect the ISIHI-2S/2U by removing the RJ-45 cable from the
ISDN jack.
2. Make sure Windows NT Remote Access Service (RAS), or any other application that
is using the modem, is shut down. To shut down RAS, click Start, Programs, and
then Administrative Tools (Common). Then click Remote Access Admin and click
Server, which will indicate whether or not RAS is running. If it is running, click Stop
Remote Access Service.
3. Insert the diskette labeled Config Utility (ISDNTA). Click Start, Programs, and then
the ISDN TA Configuration Utility icon.
4. The Welcome dialog box appears. Click Next.
5. The Searching for TA dialog box appears. Click Next.