Specifications

170 MultiModemISI Hybrid Series, ISIHI-2S/2U
Appendix
Appendix O: Regulatory Agency Information
FCC Part 68 Telecom
1. This equipment complies with part 68 of the Federal Communications Commission
Rules. On the outside surface of this equipment is a label that contains, among other
information, the FCC registration number. This information must be provided to the
telephone company.
2. As indicated below, the suitable jack (Universal Service Order Code connecting
arrangement) for this equipment is shown. If applicable, the facility interface codes
(FIC) and service order codes (SOC) are shown.
3. An FCC compliant telephone cord and modular plug is provided with this equipment.
This equipment is designed to be connected to the telephone network or premises
wiring using a compatible modular jack that is Part 68 compliant. See installation
instructions for details.
4. If this equipment causes harm to the telephone network, the telephone company will
notify you in advance that temporary discontinuanace of service may be required. If
advance notice is not practical, the telelphone company will notify the customer as
soon as possible.
5. The telephone company may make changes in its facilities, equipment, operation, or
procedures that could affect the operation of the equipment. If this happens, the
telephone company will provide advance notice to allow you to make necessary
modifications to maintain uninterrupted service.
6. If trouble is experienced with this equipment (the model of which is indicated below),
please contact Multi-Tech Systems, Inc. at the address shown below for details of how
to have repairs made. If the equipment is causing harm to the network, the telephone
company may request you to remove the equipment form t network until the problem
is resolved.
7. No repairs are to be made by you. Repairs are to be made only by Multi-Tech Systems
or its licensees. Unauthorized repairs void registration and warranty.
8. Manufacturer: Multi-Tech Systems, Inc.
Trade name: MultiModemISI Hybrid
Model number: ISIHI-2U
FCC registration number: AU7USA-25932-DD-E
Facility interface code: 02IS5
Modular jack (USOC): RJ-49C (8-pin with middle pins for T-R)
Service center in USA: Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, MN 55112
[phone] Fax [phone]