Specifications

MultiModem ISI Hybrid Series, ISIHI-2S/2U 165
Appendix
COMMAND DESCRIPTION
!L Display Network Configuration
Displays the status of the SPID configuration. If the configured SPID is approved by the
central office, displays a SPID CORRECT status. If the configured SPID is not approved
by the central office, displays a SPID INVALID status.
!N1=n Directory Number 0
n = 24-character string
!N1=n Sets DN for channel 0
!Z=n Rate Adaption Protocol
!Z=5 V.120 protocol
!Z=9 PPP protocol
*!C6=n Voice SPID
n = 0 to 20 character string
*!D3=n SAPI-O Voice TEI
n = 0 to 63, 240 (auto), 241 (disable)
!D3=063 Sets TEI to a fixed value from 0 through 63
!D3=240 Sets data channel for dynamic TEI negotiation (factory default)
!D3=241 Disables TEI
*!N1=n Directory Number 1
n = 24-character string
*!N1=n Sets DN for channel 1
$Dn Persistent DTR Dialing
n = 0, or 1
Default: $D0 (Disabled)
Enables or disables persistent DTR dialing (PDD). PDD causes the terminal adapter to
automatically and continually redial stored telephone number 0 when the port has no
active calls and DTR is high.
>Dn Embedded Protocol Analyzer
n = 0, 1, 2, 3, 98, or 99
>D0 Display B-channel traffic, decoded as V.120
>D1 Display D-channel traffic, decoding layers 2 and 3 (Q.921 and Q.931)
>D2 Display D-channel traffic, decoding layer 2 only (Q.921)
>D3 Display D-channel traffic, decoding layer 3 only (Q.931)
>D5 Display async PPP data
>D6 Display sync PPP data
>D98 Disable Embedded Protocol Analyzer, buffered data unchanged
>D99 Enable Embedded Protocol Analyzer, clearing buffered data