Specifications

164 MultiModemISI Hybrid Series, ISIHI-2S/2U
Appendix
COMMAND DESCRIPTION
Qn Enable/Disable Result Codes
n = 0, 1
Q0 Enable result codes
Q1 Disable result codes for applications such as computer-controlled auto dialing
Vn Terse/Verbose Result Codes
Xn Connect Messages
Z Reset to Stored Profiles
%A97=n Dialing Method
n = 0 or 1
%A97=0 En bloc sending
%A97=1 Overlap sending
%En Escape Sequence Options
n = 05
Default: %E1 and %E4
By default, the modem responds only to the +++ escape method. However, you can use
the %E command to set the modem to respond only to the <break> method, to respond to
either +++ or the <break> method, or to ignore both methods and not escape.
%E0 Modem wont escape
%E1 +++ escape method
%E2 <BREAK> escape method
%E3 Both +++ and <BREAK> escape methods
%E4 Disable OK response to +++
%E5 Enable OK response to +++
%E1 %E5 Enable +++ method and OK response to +++
%E3 %E5 Enable +++ or <BREAK> method and OK response to +++
!C0=n Network Switch Type
n = 0, 1, 2, or 5
!C0=0 AT&T 5ESS
!C0=1 Northern Telecom DMS-100, International default
!C0=2 NET3 (Euro ISDN)
!C0=5 U.S. National ISDN-1 (NI-1), US factory default
!C6=n Data SPID
n = 0 to 20-character string
!D3=n SAPI-O Data TEI
n = 0 to 63, 240 (auto), 241 (disable)
!D3=063 SetsTEI to a fixed value from 0 through 63
!D3=240 Sets data channel for dynamic TEI negotiation (factory default)
!D3=241 Disables TEI