Owner`s manual

Software/Driver Installation
52 MultiModemISI Hybrid Series, ISIHI-2S/2U
To define your own terminal capability database, refer to the Description
File Format below. The following options are defined:
-hPrints the Help file. Multi_View uses the environment variable
MTDSPLY to choose the utility to display this file. If no such variable
is found in the environment, then Multi_View uses the pg utility.
-t Informs Multi_View to use a terminal description different from the
one specified by the TERM variable in the user environment.
-f Allows user to instruct Multi_View to read the terminal description
from a different file than the default description file. The default
description file is usr/bin/msfile.
Description File Format
A description file may contain descriptions for multiple terminal types.
Separate each terminal entry by a blank line. The first line for each terminal
contains the various names by which that terminal is known. The three types
of entries for each terminal emulation are hot key entries, terminal escape
sequences, and timing specifications.
Hot Key Entries
These entries have three columns. The first column specifies a mnemonic,
which is associated with a specific action taken by Multi_View. The
mnemonics are listed below:
Mnemonic Description
vs Identifies the virtual screen entry. An entry is present for each
virtual screen that needs to be opened by Multi_View
sw Identifies the hot key sequence for switching between two
virtual screens
cm Identifies the hot key sequence that instructs Multi_View to
create a new virtual screen
lm Identifies the hot key sequence for displaying help on the hot
keys