Owner`s manual
Software/Driver Installation
MultiModemISI Hybrid Series, ISIHI-2S/2U 45
NetWare Connect (Novell) Driver Installation
Multi-Tech Systems provides AIO drivers for the ISIHI-2S/2U, so it can
function with Novell compatible asynchronous applications (e.g., NetWare
Connect). The AIO driver is simply an NLM (NetWare Loadable Module)
that runs on the file server. Drivers must be loaded on the file server where
the board is installed. Drivers can be loaded from the file servers console
prompt or incorporated for autoloading in the AUTOEXEC.NCF file.
To install the Multi-Tech AIO driver, copy the file AIOISIX.NLM to the
system directory of the file server from a workstation on the network. To
copy, you can use the following command:
COPY A:\AIOISIX.NLM F\:SYSTEM
To load the driver, go to the system or PC console (where the ISIHI-2S/2U
is installed) and enter the following at the prompt:
LOAD AIOISIX [port=W] [int=X] [name=Y] [note=Z]
To install the ISIHI scripts, copy aiomdms.mdc to f:\system\aio\directory.
Click Yes to overwrite the existing aiomds.mdc file.
Configuring Ports for NetWare Connect
To set up NetWare Connect ports, enter LOAD NWCCON at the NetWare
console prompt. LOAD NWCCON opens the NetWare Connect
Configuration Utility. Select the appropriate menu options (modem type,
speed, flow control, etc.)
Removing the Driver (Novell)
In Novell, remove file AIOISIX.NLM from the system directory and make
the appropriate changes to the Autoexec.ncf file.