Owner`s manual

Software/Driver Installation
42 MultiModemISI Hybrid Series, ISIHI-2S/2U
10. To load the configuration, click Next in the Load Configuration
dialog box.
11. Then click Finish in the Configured dialog box.
12. The first TA now is configured. Click Back to return to the Configura-
tion dialog box and repeat steps 5 through 10 to configure the remain-
ing TA(s). If you install multiple ISIHI-2S/2U in the same PC, you
must configure two TAs per card installed. For example, if you install
four ISIHI-2S/2U cards in one PC, you have to configure eight TAs
(two per card).
13. After both TAs are configured, close the ISDN TA Configuration utility
and connect the to the network again.