Owner`s manual

Software/Driver Installation
MultiModemISI Hybrid Series, ISIHI-2S/2U 39
ISDN TA Configuration Utility
1. Before you start the ISDN TA Configuration utility, disconnect the
ISIHI-2S/2U by removing the RJ-45 cable from the ISDN jack.
2. Make sure Windows NT Remote Access Service (RAS), or any other
application that is using the modem, is shut down. To shut down RAS,
click Start, Programs, and then Administrative Tools (Common).
Then click Remote Access Admin and click Server, which will
indicate whether or not RAS is running. If it is running, click Stop
Remote Access Service.
3. Insert the diskette labeled Config Utility (ISDNTA). Click Start,
Programs, and then the ISDN TA Configuration Utility icon.
4. The Welcome dialog box appears. Click Next.
5. The Searching for TA dialog box appears. Click Next.