User guide

8
MultiFRAD 3000-Series User Guide
Front Panel Description
The front panel of the MultiFRAD contains groups of LEDs that provide the information on the
composite link activity, LAN, data channels, and Voice/Fax channel activity, and the general
status of the MultiFRAD.
3000-Series
Router/Multiport Data/Voice/Fax
Frame Relay Access Device
Voice/Fax Channel 8
Voice/Fax Channel 7
Voice/Fax Channel 6
Voice/Fax Channel 5
Voice/Fax Channel 4 Voice/Fax Channel 3 Voice/Fax Channel 2
Voice/Fax Channel 1
XSG
RSG
XMT
RCV
E&M
FAX
FXS
FXO
XSG
RSG
XMT
RCV
E&M
FAX
FXS
FXO
XSG
RSG
XMT
RCV
E&M
FAX
FXS
FXO
XSG
RSG
XMT
RCV
E&M
FAX
FXS
FXO
XSG
RSG
XMT
RCV
E&M
FAX
FXS
FXO
XSG
RSG
XMT
RCV
E&M
FAX
FXS
FXO
XSG
RSG
XMT
RCV
E&M
FAX
FXS
FXO
XSG
RSG
XMT
RCV
E&M
FAX
FXS
FXO
Composite Link
Ethernet
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
Channel 9 Channel 10
XMT
RCV
XMT
RCV
XMT
RCVXMT
RCV
XMT
RCV
XMT
RCV
XMT
RCV
XMT
RCV
BTG
PWR
LNK
EXT
V35
CTS
CD
XMT
RCV
XMT
RCV
COL
LNK
XMT
RCV
V35
XMT
RCV
V35
The LED’s are as follows:
PWR Power. This indicator lights when the ON/OFF switch is in the ON position.
BTG Booting. This indicator lights when the MultiFRAD is booting. It takes approximately 90
seconds to boot.
Composite Link
RCV Receive. This indicator blinks when the composite link is receiving data.
XMT Transmit. This indicator blinks when the composite link is transmitting data.
CD Carrier Detect. This indicator lights when the MultiFRAD detects a carrier signal.
CTS Clear To Send. This indicator lights when the composite link device is ready to
transmit data.
V35 V.35 Interface. This indicator lights when the composite link is configured for a V.35
interface.
EXT External Link. This indicator lights when the MultiFRAD is configured for an external
composite device.
LNK Link. This indicator lights solid when all DLCIs detected become active; flashes fast
when at least one DLCI is active and others are inactive; flashes slow when
communication with the local frame relay switch has occurred; and off when no frame
relay communication has been received.
Ethernet
RCV Receive. This indicator blinks when packets are being received from the local area
network.
XMT Transmit. This indicator blinks when packets are being transmitted to the local area
network.
COL Collision. This indicator lights when a collision is in progress; that is, when two nodes
are transmitting packets at the same time.
LNK Link. This indicator lights indicating that the MultiFRAD is connected to the local area
network.