Network Card User Manual

Technical Specifications
15
Roaming Full mobility and seamless roaming from cell to
cell and across access points (subject to access
point)
Network Protocol TCP/IP, IPX, NDIS3, NDIS4
Management Ability Link Config for network join and diagnosis
EMC Certification FCC Part 15 Class in US, ETSI 300.328 and CE
EMC-EEC in Europe, ARIB-Telec in Japan
Packaging Generic, Multi-Tech Systems, Inc., private
labeling optional
Data Encryption 64 bit and 128 Bit WEP Encryption
Supported Bit Rates 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps
Utility Software Configuration Utility Software
Standards IEEE 802.11b
Transport Protocols
TCP/IP, IPX/SPX, NetBEUI
TCP/IP Protocols BOOTP, SNMP, Telnet, DHCP, FTP
System Requirements IBM compatible with Pentium 100 or faster
processor, USB port
Supported Operating
Systems
Windows 98, Windows Me, Windows 2000
Data Rate 11 : CCK
5.5 : CCK
2 : DQPSK
1 : DBSK
Key Management Automatic Dynamic Key Allocation (ADKA)
through public key
Range Indoor – per cell approx. 35 to 100 meters
Outdoor – per cell approx. 100 to 300 meters
Diagnostic LED Power, Activity
Power Specifications Operating Voltage: +5V, DC (+/-) 5%
Transmit Power Nominal Temp. Range: 17 dBm
Extended Temp. Range: 14 dBm min.
Transmit Power, 2.7v to 3v: 14 dBm min.
Network Architecture Supports Ad-Hoc Mode (Peer-to-Peer without
Access Point) or Infrastructure Mode
(Communications to wired networks via Access
Points with Roaming)
Compliant with IEEE 802.11b
Antenna External antenna supporting diversity
Mobility: Seamless roaming across cell
boundaries with handover