User manual

MTASR1-100 Owner’s Manual
152
The Reading Setup dialog box is displayed.
6 The Router Setup dialog box is then displayed. This is the dialog box of the remote RouteFinder
100
. You
can select any of the Protocol Stacks, Device drivers, or other buttons and change the configuration of the
remote RouteFinder
100
. Refer to the Menus Chapter (Chapter 5) for the definition of each dialog box and
field within a dialog box.
7 After you have changed the configuration of the remote RouteFinder
100
, click on the Download Setup
button to update the configuration. The remote RouteFinder
100
will be brought down, the new
configuration written to the unit, and the unit will reboot.
8 Click on the Exit button when the downloading is complete.
9 Click on the Router Configuration icon in the Program Manager screen to verify that the RouteFinder
100
is
running.