User manual

13
Chapter 2 - Hardware Installation
MTA128ST-USB
Assembling the MTA128ST-USB
The only assembly required is to mount the feet on the bottom of your unit (See Figure 2-
2). Peel the four self-adhesive plastic feet off the backing strip and press them into the
recesses on the bottom.
TD RD LS B1 B2 TR OH 128 P1 P2
USB ISDN Modem with Analog Port
Figure 2-2. Mounting the Feet
Connecting the MTA128ST-USB to Your System
Place the MTA128ST-USB terminal adapter in a convenient location. In a typical
configuration, you will need to connect your MTA128ST-USB to your computer’s USB
port, to its own power supply, to the ISDN network terminator, and to any optional analog
equipment you are using (e.g., a telephone). For each cabling procedure, see Figure 2-3.
PHONE
ISDN
USB
POWER
Figure 2-3. MTA128ST-USB Connections