User's Manual

MultiModemII Quick Start Guide
2
What You Will Need
In addition to the contents of the MultiModemII package, you
will need the following items:
A computer with an unused serial port
A shielded RS-232 serial cable with a male DB-25 connec-
tor on one end and a connector to match your computer’s
serial port on the other end
A nearby AC power outlet
A nearby telephone line
A nearby leased line jack or terminals (optional)
Safety Warnings
• Use this product only with UL- and CUL-listed computers.
• To reduce the risk of fire, use only 26 AWG or larger tele-
phone wiring.
• Never install telephone wiring during a lightning storm.
• Never install a telephone jack in a wet location unless the
jack is specifically designed for wet locations.
• Never touch uninsulated telephone wires or terminals
unless the telephone line has been disconnected at the
network interface.
• Use caution when installing or modifying telephone lines.
• Avoid using a telephone (other than a cordless type) dur-
ing an electrical storm; there is a risk of electrical shock
from lightning.
• Do not use a telephone in the vicinity of a gas leak.