- Multi-Tech User Guide Modem MTASR1-100

RouteFinder MTASR1-100 User Guide

MTASR1-100

4. Build your user database by filling in the following fields for each user.

User Name.

The User Name can have as many as 39 characters. All printable characters are permitted with the

restriction that no blanks are allowed in the user name. In dial-in and dial-out applications, the user

name is treated as a case insensitive string.

User Password.

The User Password can have as many as 7 characters. In places where the password is used as a

character string, it is treated as a case insensitive string. Elsewhere (PPPs CHAP), it is treated as a

case sensitive pattern.

Call Back

You have to click this check box in order to access the following three Call Back functions.

Call Back Security Enabled

This parameter is of use in dial-in applications where the user is required to be called back at a

specific location. Enabling this parameter (Alt-S) results in having the administrator assigning the call

back parameters. Leave this function disabled if the user is to be allowed to choose the call back

number and the call back delay.

Call Back Number

The callback number is editable only if callback security is enabled (checked). This is the number

where the user will be called back. The user cannot choose the location where he wants to be called

back.

Call Back Delay

Call back delay is editable only if callback security is enabled. This specifies the duration (in seconds)

after which the user will be called back at the administrator-assigned number.

Protocols

This lets you select the protocol(s) the user is allowed to dial into the RouteFinder.

Dial In Port

WAN Port1 is available for dialing into the RouteFinder.

Dial Out Port

WAN Port1 is available for dialing out from the RouteFinder.

5. After each user is defined on the Add Users screen, click OK to display the updated Users List dialog

box. Click Add User to continue adding users to your database.

6. When you have added all users to the data base, click Download to load the database into the

RouteFinder.