- Multi-Tech User Guide Modem MTASR1-100

Chapter 1 - Introduction and Description
MTASR1-100 11
Specifications
The RouteFinder conforms to the following specifications.
• Routing Protocols - IP and IPX and bridging for all others
• Ethernet LAN Interface - 10Base-T (twisted pair) or 10Base2 (ThinNet) BNC
• WAN Interface - 1 async or sync link (RS-232C/V.35)
• Command Port - 19.2 Kbps Asynchronous
• Two 4-megabyte DRAMs (1 meg by 36 bytes at 70 nanosecond SIMMs)
Caution: SIMM speed and size cannot be mixed.
• 1 MB of Flash memory
Ethernet Port
• One Ethernet Interface - 10Base-T (twisted pair) RJ-45 connector or 10Base2 (ThinNet) BNC
connector.
Command Port
• Single 19.2 Kbps asynchronous Command Port using a short RJ-45 to DB25 cable with a
female connector.
WAN Link
• 115.2 Kbps asynchronous WAN link or T1 (1.544 Mbps) sync link using DB25 male
connector. Optional ITU-T V.35 interface using a V.35 adapter cable.
Electrical/Physical
• Voltage - 115 VAC (Standard), 240 Volts AC (Optional)
• Frequency - 47 to 63 Hz
• Power Consumption - 10 Watts
• Dimensions - 1.625" high x 6" wide x 9" deep
0.63 cm high x 2.34 cm wide x 3.51 cm deep
• Weight - 2 pounds (.92 kg)