- MultiConnect Adapter User Guide

Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 20
General Commands – Setup
Command Syntax show buildrun
Description Command Line Configuration - History.
Upon invoking any command, either through Telnet or Serial TTY, the
command is added to the buildrun file. This is very useful in case of
version updates.
Default Value
NA
Success
OK
Error 1. Too few arguments
"Too few arguments. Possible argument(s) are
serial date statistics users
buildrun ip sys-info
configuration ppp time
2. Invalid argument
Invalid argument "string". Valid arguments are
serial date statistics users
buildrun ip sys-info
configuration ppp time
General Commands – Show
Command Syntax show configuration
Description
Displays the MultiConnect IP configuration.
Default Value
NA
Success
OK
Error 1. Too few arguments
“Too few arguments. Possible argument(s) are:
serial ppp sys-info device-parameter
configuration recv-mail time
date http users
buildrun statistics send-mail
2. Invalid argument
Valid arguments are:
serial ppp sys-info device-parameter
configuration recv-mail time
date http users
buildrun statistics send-mail
Command Syntax show date
Description
Shows the system date.
Default Value
NA
Success
OK
Error 1. Too few arguments
Too few arguments. Possible argument(s) are:
ip statistics users
configuration ppp sys-info
date serial time
2. Invalid argument
Invalid argument "Invalid string". Valid arguments are
ip statistics users
configuration ppp sys-info
date serial time