- MultiConnect Adapter User Guide

Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 50
SMTP Client Commands – Setup
Command Syntax set send-mail to-address <n> <email-address> where n = 1 to 5.
Description
Sets the email-address as one of the primary addressee. This is the default
email address to which email messages are sent.
Default Value
NULL
Success
OK
Error 1. Too few arguments
“Usage: set send-mail to-address <n> <email-address>
Type 'set send-mail to-address <n> ?' for more information”
2. Invalid to-address number
“ERROR: to-address numbers supported: [1 to 5]
Type 'set send-mail to-address <n> ?' for more information”
Command Syntax set send-mail cc-address <n> <email-address> where n = 1 to 5.
Description
Sets the email-address as the alternate addressee (carbon copy). This is
the default email address that the primary addressee's email messages are
copied.
Default Value
NULL