Network Adapter MTA128ST MTA128NT User Guide
Appendices
MTA128ST/NT 48
AppApp
AppApp
App
endix A:Cendix A:C
endix A:Cendix A:C
endix A:C
onfonf
onfonf
onf
igurigur
igurigur
igur
ation Pation P
ation Pation P
ation P
rr
rr
r
ofof
ofof
of
ilesiles
ilesiles
iles
Quick Setup Factory Profiles
For quick setup, the MTA128ST/NT includes six Quick Setup Factory Profiles, each of which is configured
for a specific type of port operation. You can load a Quick Setup Factory Profile into active memory by
using the command
&Fn,
in which
n
is the number of the profile you wish to load. If you wish, you can then
customize the profile and store it, using the
&W
command, so that it loads automatically when the
MTA128ST/NT is turned on or reset. These profiles are stored in permanent memory and are not user-
configurable as such.
MTA128ST
&F0
Profile 0—Modem-like operation (default)
&F1
Profile 1—V.110 async operation
&F2
Profile 2—V.120 async operation
&F3
Profile 3—X.75 async operation
&F4
Profile 4—ML-PPP async operation
&F5
Profile 5—SoftBonding Asynchronous Operation
&F6
Profile 6—HDLC Asynchronous Operation
&F7
Profile 7—CLEAR operation
MTA128NT
&F0
Profile 0–Modem-Like Asynchronous Operation
&F1
Profile 1–V.120 Asynchronous Operation
&F2
Profile 2–X.75 Asynchronous Operation
&F3
Profile 3–PPP Asynchronous Operation
&F4
Profile 4–SoftBonding Asynchronous Operation
&F5
Profile5–HDLC Asynchronous Operation
&F6
Profile 6–CLEAR Asynchronous Operation
Quick Setup Example
The following procedure assumes that you want to load, modify, and store Quick Setup Factory Profile 2 as
your default configuration.
1. Select the profile closest to the requirements of your application, in this case— Quick Setup Factory
Profile 2.
2. In terminal mode, type
AT&F2
and press ENTER. Quick Setup Profile 2 loads into the MTA128ST/NT’s
active memory.
3. Enter any additional AT commands that you need to customize the selected profile to your application
(see Chapter 4,
AT Commands, S-Registers, and Result Codes
).
4. Type
AT&W0
and press ENTER to save your customized port configuration.
5. Your customized profile now loads automatically whenever the MTA128ST/NT is turned on or reset.