- Multi-Tech Syst Data/Fax Modem Data/Fax/Voice Modem Owner's Manual (User Guide) MT3334ZDX , MT3334ZDXV

3 - AT Commands, S-Registers and Result Codes
37
Register: S5
Unit: decimal
Range: 0-32, 33-127
Default: 8(^H)
Description: Sets ASCII code for the backspacecharacter.
Values greater than 32 disable the backspace
character.
Register: S6
Unit: seconds
Range: 2-65
Default: 2
Description: Sets the time the modem waits after it goes off-
hook before it begins to dial the telephone number.
Register: S7
Unit: seconds
Range: 1-255
Default: 50
Description: Sets the time the modem waits for a carrier signal
before aborting a call. Also sets the wait for silence
time for the @ dial modifier.
Register: S8
Unit: seconds
Range: 0-65
Default: 2
Description: Sets the length of a pause caused by a comma
character in a dialing command.
Register: S9
Unit: ASCII
Range: 0-127
Default: 0
Description: Defines Remote Configuration Escape Character.
Register: S10
Unit: 100ms
Range: 1-254
Default: 20
Description: Sets how long a carrier signal must be lost before
the modem disconnects.