- Multi-Tech Syst Data/Fax Modem Data/Fax/Voice Modem Owner's Manual (User Guide) MT3334ZDX , MT3334ZDXV

MT3334ZDX/V Owner's Manual
34
Command: \K n Set Break Control
Values: n = 5
Default: 5
Description: \K5 Modem sends break signal received from the DTE
to the remote modem.
Command: \N n Error Correction Mode Selection
Values: n = 0–5
Default: 3
Description: \N0 Non-error correction mode with data buffering
(same as &Q6 ).
\N1 Direct mode.
\N2 MNP reliable mode.
\N3 V.42/MNP auto-reliable mode.
\N4 V.42 reliable mode.
\N5 V.42, MNP, or non-error correction (same as \N3 ).
Command: \V n Protocol Result Code
Values: n = 0 or 1
Default: 1
Description: \V0 Disable protocol Result Code appended to DCE
speed.
\V1 Enable protocol Result Code appended to DCE
speed.
Command: %C n Data Compression Control
Values: n = 0 or 1
Default: 1
Description: %C0 Disable V.42bis/MNP 5 data compression.
%C1 Enable V.42bis/MNP 5 data compression.
Command: $D DTR Dialing
Values: n = 0 or 1
Default: 0
Description: $D0 Disables DTR Dialing.
$D1 Enables DTR Dialing.