User Manual

Chapter 3—Driver Installation

Windows NT: Driver Installation

The following procedure describes how to install the ISI5634PCI in a system operating Microsoft

Windows NT 3.51 or 4.0 for use with Remote Access Service (RAS) server and other communications/

fax server type applications. These procedures apply to both 3.51 and 4.0.

1. Ensure that your ISI5634PCI card has been installed according to the Hardware Installation

Procedures in Chapter 2.

2. Turn on the PC and start Windows NT.

3. Insert the ISI Family CD-ROM into the CD-ROM drive (if drivers have been downloaded from the

MultiTech web site, they will typically be on diskette; in that case, insert diskette into floppy drive).

4. Click Start, Settings, Control Panel, and then double-click Network. In the Network dialog box,

click the Adapters tab.

Click Add.