User Manual

35
Chapter 3—Driver Installation
13. After bindings have been reviewed and stored, you will be prompted to re-start your computer. Click
Yes.
You have completed installation of modems to COM ports and configuration of RAS in Windows NT.
Note: By default, Microsoft sets the serial baud rate at 57,600 bps. For improved performance, you can
raise the serial baud rate. To do so, go to Start | Settings | Control Panel. Click on the Modems
icon. Then click on the Properties button of the Modems Properties dialog box. Reset the
“Maximum Speed” as needed. A speed of 320,400 bps improves performance significantly without
complications in most cases.
Windows NT: Removing ISI5634PCI Driver
1. Click Start, Settings, Control Panel, and then double-click Network.
2. The Network dialog box appears. Click the Adapters tab.
3. Select Multi-Tech 4, 8, 16-port ISI Card, and then click Remove.
4. To complete an uninstall, reboot your computer.