User Manual

26
ISI5634PCI/4/8 User Guide
Windows 2000: Removing ISI5634PCI Driver
1. Go to Start | Settings | Control Panel.
2. Click on Add/Remove Hardware. Click Next.
3. Click on “Uninstall/Unplug a device” and click Next.
4. In the subsequent screen, click on “Uninstall a device” and click Next.
5. At the Add/Remove Hardware Wizard screen, highlight the ISI driver file for the specific server card
that you intend to remove. Click Next.
6. When you are asked to confirm removal, click on the Yes radio button and click Next.
7. Click Finish. You can remove the driver for only one ISI5634PCI card at a time.
Windows 2000: Installing ISI Management Software (server OSs only)
If you are using a Windows 2000 Server operating system ("Server" or "Advanced Server"), you must
decide whether you want to use the MultiTech ISI Management Software in conjunction with your
ISI5634PCI board. The ISI Management Software is shipped with the ISI card and, alternatively, can be
downloaded from the MultiTech web site (www.multitech.com).
1. Turn on your computer and start Windows 2000.
2. Insert the ISI Family CD-ROM or diskette containing the ISI Management Software into your CD-ROM
or floppy drive.
3. From My Computer, right click on the CD-ROM icon. The ISI Management Software is in the
Servcard|Utilities|Mgnt folder. Double click on Setup.exe and the Install Shield Wizard loads the
management software.
Click OK.
4. The ISI Management Welcome screen appears. Click Next.
5. A progress screen appears while files are copied. If the Error Creating Virtual WWW Server
message appears, it may indicate that there was an attempt to install the ISI Management Software
on a client version of Windows 2000. (The ISI Management Software can be installed only in the
Windows 2000 Server and Windows 2000 Advanced Server operating systems.)
6. A completion screen appears. Select "Yes, I want to restart my computer now" and click Finish.
After the computer has restarted, the installation of the ISI Management Software will be complete.