User Guide Controller MR9600

MR9600 User Guide
42 CommPlete Communications Server
Description: Displays the current Rack Type.
Security: Supervisor
Example:
getrack
Chassis Type: CC2400 single segment chassis
[2] A:\ #
getras
Parameter: Device
Description: Displays the current status of each ras device.
Security: Operator
Example:
[0] A:\MMM # getras
1A RAS Up
5A RAS Up
9A RAS Up
13A RAS Up
getreadcommunity
Parameter: None
Description: Displays the Read community settings.
Security: Supervisor
Example:
[0] A:\MMM # getreadcommunity
Read community = public
Enter SETREADCOMMUNITY <community-string> to change it.
[1] A:\ #
getsendtrap
Parameter: None
Description: Displays whether or not traps are being sent from the MR9600. See setsendtrap.
Security: Guest
Example:
[0] A:\ # getsendtrap
The sending of traps is enabled.
[1] A:\ # setsendtrap off
The sending of traps has been successfully disabled.
[2] A:\ # getsendtrap
The sending of traps is disabled.
getslots
Parameter: None
Description: Displays hardware type and location within the rack. This command also displays the
number of devices in each slot.
Security: Operator