User Guide Controller MR9600

MR9600 User Guide
40 CommPlete Communications Server
Security: Guest
Example:
[0] A:\MMM # getip
IP Address = 199.199.99.9
[1] A:\MMM #
getmodems
Parameter: Device or none
Description: Displays the current status for the modems specified by device. If there is no parameter,
current status is displayed for every installed modem.
Security: Operator
Example:
[0] A:\ # getmodems
1A Idle default.cfg Group1 Dial Up No Security
1B Idle default.cfg Group1 Dial Up No Security
1C Idle default.cfg Group1 Dial Up No Security
2A Idle default.cfg Group1 Dial Up Call In Security
2B Dial default.cfg Group1 Dial Up Call In Security
2C Ring default.cfg Group1 Dial Up Call In Security
3A Dial default.cfg Group1 Dial Up Callback Security
3B Ring default.cfg Group1 Dial Up Callback Security
3C Idle default.cfg Unassigned Dial Up Callback Security
4A Idle default.cfg Group1 Dial Up No Security
4B Idle default.cfg Unassigned Dial Up No Security
4C Idle default.cfg Group1 Dial Up No Security
[1] A:\ #
[2] A:\ # getmodems 4a:5c
4A Idle default.cfg Group1 Dial Up No Security
4B Idle default.cfg
Unassigned Dial Up No Security
4C Idle default.cfg Group1 Dial Up No Security
5A
Not Present default.cfg Unassigned Dial Up No Security
5B
Not Present default.cfg Unassigned Dial Up No Security
5C
Not Present default.cfg Unassigned Dial Up No Security
[3] A:\ #
getpowerstatus, getps
Parameter: None
Description: Displays the main power supply (or supplies) status and which segments are powered up.
Security: Guest
Example:
[02] A:\ # getpowerstatus
Left Power Supply: Installed, All outputs good
Right Power Supply: Installed, All outputs good
First Segment: Powered
Second Segment: Not Powered
Third Segment: Not Powered
Fourth Segment: Not Powered
[03] A:\ #